Zirconia Liners for Gardner Denver PZ11 MUD PUMP, PZ10 MUD PUMP, PZ-9 MUD PUMP, PZ-8 MUD PUMP, PZ-7 MUD PUMP, PAH275

 

All our fluid end parts are manufactured to API 7K quality standards.

 

Parts are available for these popular pump models:

 

BOMCO/Emsco Mud Pumps:F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

 

LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600

Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,

National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,

Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,

 

Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT

 

Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200

 

Russian Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L, NB125, NB80, NB50, NB32

 

WEATHERFORD/Ellis Williams: E-447, E-2200

 

Drillmec: 9T1000, 12T1600, 7TS600, 7TS500, 9T800

 

Romania: 3PN-1000, 3PN-1600, 3PN-2000

 

And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.

 

Premium's zirconia liner offers life time cost savings, significantly longer service, better performance and safer operation than those made of more commonly used alumina ceramic. Premium's zirconia liner is a proprietary Zirconium-based matrix that has significantly improved mechanical characteristics.

 

◎ Zirconia has three important property advantages compared to alumina.

◎ Zirconia exhibits better impact strength.

◎ Zirconia is harder than alumina.

◎ Zirconia can be honed to finer surface finishes than alumina. Finished to 4 RMS, ◎Zirconia liners - provide a surface finish that's three to four times finer than alumina.

 

All three of these property advantages translate to lower ownership costs. The improved wear directly extends the service life of the sleeve, while the improved impact strength cuts down on the significant costs of replacing broken liners in the field. The surface finish improvements, meanwhile, have an indirect effect. The finer surface finish means less friction with the elastomer-and-metal pump pistons, which in trun extends piston life and reduces pump-cooling requirements.

 

◎ HP design with shoulder-on-hull design to prevent sleeve slippage

◎ Reduced liner and piston wear

◎ Rated for all drilling operations up to 7500 PSI

◎ Bore hardness of 92-94 Rockwell

◎ ID tolerances of +.010”/ -.000”

◎ Surface finish of 4 - 8 RMS

◎ Hardness i s HV 0.3 kg/mm – 1100/1200 ( 92 - 94 Rc)

◎ High pressure design to prevent slippage

◎ Liner sizes are available from 4½” to 7” for all popular mud pumps

 

 

Mud Pump Models	4”	4-1/2”	5”	5-1/2”	6”	6-1/2”	7”
Continental Emsco F-800 / 1000	/	05495450 PREM	05495500 PREM	05495550 PREM	05495600 PREM	05495650 PREM	05495700 PREM
Continental Emsco FB-1300 / 1600	05499400 PREM	05499450 PREM	05499500 PREM	05499550 PREM	05499600 PREM	05499650 PREM	05499700 PREM
Continental Emsco FC-2200	/	/	05551500 PREM	05551550 PREM	05551600 PREM	05551650 PREM	05551700 PREM
Gardner Denver PAH-275	PA I3940 05519400 PREM	PA 13945 05445450 PREM	PA 13950 05445500 PREM	/	/	/	/
Gardner Denver PZ-7	PY13940	PY13945	PY13950 05493087 PREM	PY13955 05493085 PREM	PY13960 05493083 PREM	PY13965 05493081PREM	PY13970 05493079 PREM
Gardner Denver PZ-8/9	206PZJ456 05493400 PREM	205PZJ456 05493450 PREM	204PZJ456 05493500 PREM	203PZJ456 05493550 PREM	202PZJ456 05493600 PREM	200PZJ456 05493650 PREM	207PZJ456 05493700 PREM
Gardner Denver PZ-10/11	206PZL456 05496400 PREM	205PZL456 05496450 PREM	204PZL456 05496500 PREM	203PZL456 05496550 PREM	202PZL456 05496600 PREM	201PZL456 05496650 PREM	200PZL456 05496700 PREM
Gardner Denver PZL	206PZL456 05496400 PREM	205PZL456 05496450 PREM	204PZL456 05496500 PREM	203PZL456 05496550 PREM	202PZL456 05496600 PREM	201PZL456 05496650 PREM	200PZL456 05496700 PREM
Gardner Denver PZL-B-7500 PSI	/	/	05561500HP	05561550HP	05561600HP	05561650HP	05561700HP
Gardner Denver PZL W/SWFE 7500 PSI	05465400HP	05465450HP	05465500HP	05465550HP	05465600HP	05465650HP	05465700HP
Gardner Denver PX-11 7500 PSI	/	/	05561500HP	05561550HP	05561600HP	05561650HP	05561700HP
Ideco T-500	/	05512450 PREM	05512500 PREM	05512550 PREM	05512600 PREM	05512650 PREM	05512700 PREM
Ideco T-800 / 1000	05502400 PREM	05502450 PREM	05502500 PREM	05502550 PREM	05502600 PREM	05502650 PREM	05502700 PREM
Ideco T-1300 / 1600	/	05507450 PREM	05507500 PREM	05507550 PREM	05507600 PREM	05507650 PREM	05507700 PREM
National 7P-50	05466040 PREM	05466045 PREM	05466050 PREM	05466055 PREM	05466060 PREM	/	/
National 8-P-80	05464400 PREM	05464450 PREM	05464500 PREM	05464550 PREM	05464600 PREM	05464650 PREM	/
National 9-P-100 / 10-P-130	05465400 PREM	05465450 PREM	05465500 PREM	05465550 PREM	05465600 PREM	05465650 PREM	/
National 12-P-160	05466400 PREM	05466450 PREM	05466500 PREM	05466550 PREM	05466600 PREM	05466650 PREM	05466700 PREM
National 14-P-220	05545400 PREM	05545450 PREM	05545500 PREM	05545550 PREM	05545600 PREM	05545650 PREM	05545700 PREM
National JWS-165/340	05531400 PREM	05531450 PREM	/	/	/	/	/
National JWS-400	05524400 PREM	05524450 PREM	05524500 PREM	05524550 PREM	05524600 PREM	/	/
Oilwell HD-1700-PT	/	/	05326500 PREM	05326550 PREM	05326600 PREM	05326650 PREM	05326700 PREM
Oilwell A-600-PT	05329400 PREM	05329450 PREM	05329500 PREM	05329550 PREM	05329600 PREM	05329650 PREM	05329700 PREM
Oilwell A-850-PT / A-1100-PT	05330400 PREM	05330450 PREM	05330500 PREM	05330550 PREM	05330600 PREM	05330650 PREM	05330700 PREM
Oilwell A-1400-PT / A-1700-PT	05326400 PREM	05326450 PREM	05326500 PREM	05326550 PREM	05326600 PREM	05326650 PREM	05326700 PREM

 

No.	P/N	Description	Qty	Drawing Code
1	11-3101-0501-00	Cylinder assembly	3	GH3101-05.01.00
2	11-3101-0502	Cylinder Cover, Threaded ring	3	GH3101-05.02
3	11-3101-0503	Cylinder Cover,	3	GH3101-05.03
4	11-3101-0504	Seal ring, cylinder cover	6	GH3101-05.04
5	11-3101-0505	Plug, cylinder cover	3	GH3101-05.05
6	11-3101-0506	Puller	3	GH3101-05.06
7	B34521-975-355-69	O-ring, 97.5×3.55G	3	GB/T3452.1-1992
8	11-3101-0507	Blind plate, discharge, 5 1/8"	1	GH3101-05.07
9	11-3101-0508	Discharge manifold	1	GH3101-05.08
10	11-3101-0509	Seal ring, valve cover	3	GH3101-05.09
11	11-3101-0510	Stud, 1 1/2-8UN-2A*262	16	GH3101-05.10
12	11-3101-0501-03	Nut, 1 1/2-8UN-2B(SPL)	32	GH3101-05.01.03
13	11-3101-0511	Valve cover	3	GH3101-05.11
14	11-3101-0512	Guide, valve stem	3	GH3101-05.12
15	11-3101-0513-00	Spring guide	3	GH3101-05.13.00
16	11-3101-0514	Baffle	3	GH3101-05.14
17	11-3101-0515	Bolt, 3/8-16UNC-2A*20	12	GH3101-05.15
18	11-3161-0545	Stainless steel wire, φ1.60(L=1830)	1	GB/T4240-1993
19	11-3101-0516	Valve spring	6	GH3101-05.16
20	11-3101-0517-00	Valve assembly,(API 6#)	6	GH3101-05.17.00
21	11-3101-0518-00	Nut, piston	3	GH3101-05.18.00
22	11-3101-0519-00-1	Piston	3	GH3101-05.19.00A
23	11-3101-0520	Seal ring, piston	3	GH3101-05.20
24	11-3101-0521	Piston rod	3	GH3101-05.21
25	11-3101-0522-01-1	Ordinary liner 4 3/4	3	GH3101-05.22A
	11-3101-0522-02-1	Ordinary liner 5
	11-3101-0522-03-1	Ordinary liner 5 1/2
	11-3101-0522-04-1	Ordinary liner 6
	11-3101-0522-05-1	Ordinary liner 6 1/4
	11-3101-0522-06-1	Ordinary liner 6 1/2
	11-3101-0522-07-1	Ordinary liner 6 3/4
	11-3101-0522-01	Bi-metal liner 4 3/4		GH3101-05.22
	11-3101-0522-02	Bi-metal liner 5
	11-3101-0522-03	Bi-metal liner 5 1/2
	11-3101-0522-04	Bi-metal liner 6
	11-3101-0522-05	Bi-metal liner 6 1/4
	11-3101-0522-06	Bi-metal liner 6 1/2
26	11-3101-0523-00	Spraying pipe assembly	1	GH3101-05.23.00
27	11-3101-0524-00	Clamp assembly, piston rod	3	GH3101-05.24.00
28	11-3101-0525	Splash Shield, liner	3	GH3101-05.25
29	11-3101-0526	Fixing clamp	3	GH3101-05.26
30	11-3101-0527-00	Guide, valve stem(lower)	3	GH3101-05.27.00
31	B34521-190-700-69	O-ring, 190×7.0G	3	GB/T3452.1-1992
32	11-3101-0536	Bolt, 7/8-9UNC-2Ax55	18	US standard
33	11-3101-0528-00	Suction manifold	1	GH3101-05.28.00
34	11-3101-0529-00	Suction dampener	1	GH3101-05.29.00
35	11-3101-0530-00	Shims	4	GH3101-05.30.00
36	11-3161-0544	Bolt, 1 1/16-8UN-2A*90	36	US standard
37	11-3161-0543	Nut, 1 1/16-8UN-2B(SPL)	36	US standard
38	B34521-345-700-69	O-ring, 345×7.0G	3	GB/T3452.1-1992
39	11-3101-0531	Suction flange(Ⅰ)	1	GH3101-05.31
40	11-3101-0532	Suction flange(Ⅱ)	1	GH3101-05.32
41	11-3101-0533	Plug screw, NPT1 1/2	1	GN3101-05.33
42	11-3101-0534	Washer, 39	24	GH3101-05.34
43	11-3101-0535	Blind plate, suction inlet, 12"	1	GH3101-05.35
44	11-3161-0546	Sealant	1	277

 

 

 

No.	P/N	Description	Qty	Drawing Code
1	11-3101-0401	Crosshead	1	GH3101.04.01
2	11-3101-0402	Slide, upper	1	GH3101.04.02
3	11-3101-0420	Bolt, 1-8UNC-2Ax55	2	US standard
4	11-3101-0403	End cover	1	GH3101-04.03
5	B34521-175-355-69	O-ring, 175×3.55G	1	GB/T3452.1-1992
6	11-3101-0404	Stuffing Box	1	GH3101-04.04
7	11-3101-0405	Seal ring	1	GH3101-04.05
8	11-3101-0406	Oil seal	1	GH3101-04.06
9	11-3101-0407	Pipe joint, NPT3/8x50.8	2	GH3101-04.07
10	11-3101-0408	Splashguard	1	GH3101-04.08
11	11-3101-0409	Extension rod	1	GH3101-04.09
12	11-3101-0410	Crosshead pin	1	GH3101-04.10
13	11-3101-0421	Bolt, 1-8UNC-2Ax65	8	US standard
14	11-3101-0411	Adjusting shim	2	GH3101-04.11
15	11-3101-0412	Slide, lower	1	GH3101-04.12
16	11-3101-0413	Slide retainer plate	8	GH3101-04.13
17	B34521-140-700-69	O-ring, 140×7.0G	1	GB/T3452.1-1992
18	11-3101-0422	Bolt, 3/8-16UNC-2Ax35	4	US standard
19	B0093-10-59	Washer, 10	4	GB/T93-1987
20	11-3101-0414	Locking Spring	1	GH3101-04.14
21	11-3101-0423	Screw, 3/4-10UNC-2Ax55	8	US standard
22	11-3101-0415	Gasket	1	GH3101-04.15
23	11-3101-0416	Crosshead Pin Cap	1	GH3101-04.16
24	11-3101-0417	Crosshead bearing, 5G254936Q	1	GH3101-04.17
25	11-3101-0418	Oil seal, 4.5"×5.5"×0.5"	2	GH3101-04.18
26	11-3101-0419-00	shims	8	GH3101-04.19.00
27	11-3101-0223	Sealant	1	242
28	B34521-115-530-69	O-ring, 115×5.30G	1	GB/T3452.1-1992

 

 

 

 

CONTINENTAL EMSCO FB-1300, FB-1600				QTY PER PUMP
FLUID END MODULE & ACCESSORIES
ITEM #	OEM PART #	MISSION PART #
1	0-6316-0325-00	EMSFEMFB1300CA	FLUID END MODULE COMPLETE ASSY. (ITEMS 1-22, 24- 28)	3
1A	0-6316-0357-00	EMSFEMFB1300	FLUID END MODULE STUDDED * (ITEMS 1, 2, 3, 4, 4A, 5, 6, 7, & 28)	3
2		EMSFB13LCS	STUD, MODULE TO LINER CLAMP	36
3	0-7601-0610-18	PEP53	LINER CLAMP STUD NUT	36
4	0-7507-2201-00	EMSFB13PFS	POWER FRAME STUD	18
4A	0-7507-2210-00	EMSFB13TRS	STUD, MODULE TO CYLINDER	18
5	0-7601-0630-17	EMSF1000PFSN	NUT (FOR ABOVE)	48
6	0-7507-2108-00	EMSF1000DMS	STUD, MODULE TO DISC. MANIFOLD	12
7	0-7601-0630-24	IDT800TRSN	NUT (FOR ABOVE)	12
8	0-6316-0354-00	EMSFB13LVGA	GUIDE, LOWER VALVE (WITH BUSHING)	3
9	0-6316-0096-00	EMSF1000LVGB	BUSHING, LOWER VALVE GUIDE	3
10	0-6316-0360-00	EMSFB13BOLT	LOCKBOLT, LOWER VALVE GUIDE	3
11	0-6316-0363-00	EMSFB13AR	ALIGNMENT RING	3
12	0-6316-0369-00	07916801	GASKET, HEAD SEAL	3
13	0-6316-0364-90	EMSFB13CYHPLG	PLUG, CYLINDER HEAD	3
14	0-6316-0361-00	EMSFB13CYHFLG	RING, THREADED CYLINDER HEAD	3
15	0-6316-0362-00	EMSFB13CYHCAP	CAP, THREADED CYLINDER HEAD	3
16	0-6316-0092-00	07916741	GASKET, VALVE COVER - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS)	3
17	0-7501-0051-00	PEP79	SCREW, RETAINER UPPER)	12
18	0-6397-0603-00	EMSRETAINER	PLATE, RETAINER (UPPER)	3
19	0-6397-0575-00	EMSF1000UVGB	GUIDE, UPPER VALVE	3
20	0-6316-0039-00	EMSFB13CAP	COVER, VALVE POT	3
21	0-6316-0373-00	07916800	GASKET, WEAR PLATE - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS)	3
22	0-6316-0365-00	EMSFB13WP	PLATE, WEAR	3
23	0-6316-0373-00	07916800	GASKET, LINER - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS)	3
24	0-6316-0366-00	EMSFB13LTR	RING, LINER THREADED	3
25	0-6316-0367-20	EMSFB13LL	LINER LOCK	3
26	0-7602-1600-25	99609343	GASKET, DISCHARGE MANIFOLD	3
27	0-7602-1600-61	99609442	GASKET, SUCTION MANIFOLD	3

 

 

 

 

All our fluid end parts are manufactured to API 7K quality standards.

Parts are available for these popular pump models:

BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600

 

Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,

 

National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,

 

Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,

Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT

 

Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200

 

Russian Mud Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L, NB125, NB80, NB50, NB32

 

WEATHERFORD/Ellis Williams: E-447, E-2200

 

Drillmec Mud Pump: 9T1000, 12T1600, 7TS600, 7TS500, 9T800

 

Romania Mud Pump: 3PN-1000, 3PN-1600, 3PN-2000

 

And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.

 

 

 

1,Plunger Size 3.38” - 4.00” Valve Part No. P107185 Seat Part No. P107802

Insert Part No. P107186 Spring

2,Plunger Size 4.50” Valve Part No. P107181 Seat Part No. P107180

Insert Part No. P107182 Spring

3,Plunger Size 5.00” - 6.00” Valve Part No. P107188 Seat Part No. P107187

Insert Part No. P107189 Spring4P102382

SPM2000压裂泵的型号及规格

1,Plunger Size 3.75" Plunge Part No 3P103887

2,Plunger Size 4.00" Plunge Part No 3P100339

3,Plunger Size 4.50" Plunge Part No 3P100654

4,Plunger Size" 5.00" Plunge Part No 3P100233

5,Plunger Size" 5.50 Plunge Part No 3P107060

6,Plunger Size" 5.75" Plunge Part No 3P107061

7,Plunger Size 6.00 Plunge Part No 3P107062

SPM压裂泵的型号

TWS 250 Plunger Size 1.75"-3" 3.25"-4"

TWS 400 Plunger Size 2 .50"-3" 3 .50"-4 .50”

TWS 500LW-600 Plunger Size 2 .75" 3"-4 .75"

TWS 600S Plunger Size 2 .50"-3" 3.50"-4 .50"

TWS 900 Plunger Size 3.50"-4"

TWS 1250LW Plunger Size 4"

OPI880 Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0”

TWS1000LW,TWS1300

Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0” 6.5 “ 6.75”

TWS1600 Plunger Size 3.5” 3.75” 4.0” 4.50” 5.0” 5.5” 5.75 “6.0”

TWS1800 Plunger Size 3.5” 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0”

TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”

QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”

QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”

5.50” 5.75” 6.0”

TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”

QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”

QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5

 

 

Brewster ® Mud Pumps B-550 • B-750 • B-1000 • 1100T • B-1300

Continental Emsco ® Mud Pumps F-350 • F-500 • F-650 • F-800 • F-1000 • FA-1300 • FB-1600 FB1600

Gaso ® Mud Pump 1563 • 1740-55 • 1844-60 • 2010-50 • 2200-49 • 2651 • 2652

Gardner Denver ® Mud Pumps

PAH • PZ-7 PZG • PZ-8 PZH • PZ-9 PZJ • PZ-10 PZK • PZ-11 PZL

Gardner Denver ® Well Service TEE • PE-5 • PA-8 • PAH • PJ-8 • TGF-225

Gardner Denver ® Continuous Duty GD-55T • GD-60T • GD-100T • GD-125T • GD-150T • GD-180T • GD-200T

Ideco ® Mud Pumps MM-200 • MM-300 • MM-500 • MM-500F • MM-550

Ideco ® Mud Pumps MM-550F • MM-700 • MM-700F • T-500

Ideco ® Mud Pumps T-500 • T-800 • T-1000 • T-1300 • T-1600

National ® J Series Mud Pumps J-30 • J-60 • J-100 • J-165 • J-275 • J-375 • J-625 • JWS-340 • JWS-400

National ® Mud Pumps K-280 • K-380 • K-500 • K-500A • K-700A

National ® P Series Mud Pumps 7P-50 • 8P-80 • 9P-100 • 10P-130 • 12-P-160 / 12P-160 / 12P160

Oilwell ® Mud Pumps A-350-PT • 560-PT • A-560-PT • 850-PT • A-850-PT • 1100-PT

Oilwell ® Mud Pumps A-1100-PT • 1400-PT • A-1400-PT • 1700-PT • A-1700-PT / A1700-PT

Oilwell ® Plunger Pumps C-323 through B-558 • SA-640-50 through SB-644-B

OPI ® Mud Pumps 350-D • 00-DL • 700-HDL • 1000-HDL

Wheatley ® Mud Pumps 1036 • 6070 • 7024 • 7036

Fluid End Modules

National® - Oilwell® - Continental Emsco® - Gardner Denver® - Ideco® - Skytop Brewster®

Pulsation Dampener

Hydril Type "K" Pulsation Dampener

Popular Mud Pump Spare Parts

 

Mud Pump Manufactures and Models include:

Brewster Mud Pumps

B-550 | B-750 | B-1000 | 1100T | B-1300

Continental Emsco Mud Pumps

FF-FXF | FG-FXG (A thrugh L) | FD-FXX | FC-FXX | FD-FXD | FC-FXD | FY-FXD

Continental Emsco Mud Pumps

GP-GXP | GR-GXP | GP-GXR | GR-GXR |PA-8 | PAH

Continental Emsco Mud Pumps

PJ8 | PZ-7 | PZ-8 | PZ-9 | PZ-10 | PZ-11 | PXL

Ellis Williams (Luko) Mud Pumps

WW-440 | 14W-400 | 15W-600 | 9W-1000

Gaso Mud Pump

1563 | 1740-55 | 1844-60 | 2010-50 | 2200-49 | 2651 | 2652

Gardner Denver Mud Pumps

FF-FXF;FG-FXG;A thru L FD-FXX FC-FXX FD-FXD FC-FXD FY-FXD GP-GXP GR-GXP GP-GXR GR-GXR PA-8 PJ8 PZ-7 PZ-8 PZ-9 PZ-10 PZ-11 PXL

 

Ideco Mud Pumps

MM-200 | MM-300 | MM-500 | MM-500F | MM-550

Ideco Mud Pumps

MM-550F | MM-700 | MM-700F | T-500

Ideco Mud Pumps

T-800 | T-1000 | T-1300 | T-1600

National Mud Pumps

C-150 | C-250 | C-350 | E-500 | E-700 | G-700 | G-1000

 

National Mud Pumps

K-280 | K-380 | K-500 | K-500A | K-700A

 

National Mud Pumps

7P-50 | 8P-80 | 9P-100 | 10P-130 | 12P-160

 

Oilwell Mud Pumps

6P-HD | 610-P | 212-P | 214-P | 218-P

 

Oilwell Mud Pumps

350-PT | 560-PT | A-560-PT | 850-PT | A-850-PT | 1100-PT

 

Oilwell Mud Pumps

A-1100-PT | 1400-PT | A-1400-PT | 1700-PT | A-1700-PT

 

OPI Mud Pumps

350-D | 700-HDL | 1000-HDL

 

Wheatley Mud Pumps

1036 | 6070 | 7024 | 7036

 

Wilson Mud Pumps

600 | 900