 |
|
|
|
Certification
- I'm Online Chat Now
SOUTHWEST NATIONAL 12P160 Mud Pump Zirconia Liners, F1600 mud pump Ceramic Liner, 12P160 ceramic liner, FB1600 mud pump
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
| Usage: | Oil,Water,drill Rig | Power: | Electric,diesel |
|---|---|---|---|
| Pressure: | High Pressure,Low Pressure | Application: | Mining,oil |
| Structure: | Piston Pump | Fuel: | Diesel,diesel Engine And Hydraulic Motor For Option |
| Standard Or Nonstandard: | Standard | Type: | Mud Pump |
| Color: | Green Or Per Customer Design | Material: | Cast Iron/stainless Steel Mud Suction Pump,Chrome Alloy |
| Warranty: | 12 Months | Product Name: | Mud Pump |
| Oem: | Can Be Accept,Applicable | Condition: | New |
Premium's zirconia liner offers life time cost savings, significantly longer service, better performance and safer operation than those made of more commonly used alumina ceramic. Premium's zirconia liner is a proprietary Zirconium-based matrix that has significantly improved mechanical characteristics.
◎ Zirconia has three important property advantages compared to alumina.
◎ Zirconia exhibits better impact strength.
◎ Zirconia is harder than alumina.
◎ Zirconia can be honed to finer surface finishes than alumina. Finished to 4 RMS, ◎Zirconia liners - provide a surface finish that's three to four times finer than alumina.
All three of these property advantages translate to lower ownership costs. The improved wear directly extends the service life of the sleeve, while the improved impact strength cuts down on the significant costs of replacing broken liners in the field. The surface finish improvements, meanwhile, have an indirect effect. The finer surface finish means less friction with the elastomer-and-metal pump pistons, which in trun extends piston life and reduces pump-cooling requirements.
◎ HP design with shoulder-on-hull design to prevent sleeve slippage
◎ Reduced liner and piston wear
◎ Rated for all drilling operations up to 7500 PSI
◎ Bore hardness of 92-94 Rockwell
◎ ID tolerances of +.010”/ -.000”
◎ Surface finish of 4 - 8 RMS
◎ Hardness i s HV 0.3 kg/mm – 1100/1200 ( 92 - 94 Rc)
◎ High pressure design to prevent slippage
◎ Liner sizes are available from 4½” to 7” for all popular mud pumps
Southwest NATIONAL mud pump zirconia liner part number:
| Southwest 8P-80 | 1371G06 PREM | 1371G08 PREM | 1371G1 PREM | 1371G3 PREM | 1371G5 PREM | 1371G7 PREM | / |
| Southwest 9P-100/10P-130 | 1367G06 PREM | 1367G08 PREM | 1367G1 PREM | 1367G3 PREM | 1367G5 PREM | 1367G7 PREM | / |
| Southwest 12P160 | 1376G06 PREM | 1376G08 PREM | 1376G1 PREM | 1376G3 PREM | 1376G5 PREM | 1376G7 PREM | 1376G9 PREM |
| Southwest 14P220 | / | / | 6382G1 PREM | 6382G3 PREM | 6382G5 PREM | 6382G7 PREM | 6382G9 PREM |
All our fluid end parts are manufactured to API 7K quality standards.
Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L, NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.
| No. | P/N(HHF-1300/1600) | Description | Qty |
| 1 | 11-3161-0501-00 | Cylinder assembly | 3 |
| 2 | 11-3161-0502 | Cylinder Cover, Threaded ring | 3 |
| 3 | 11-3161-0503 | Cylinder Cover, Threaded ring | 3 |
| 4 | 11-3161-0504-00 | Spacer assembly | 3 |
| 5 | 11-3161-0505-00 | Guide, valve lower | 3 |
| 6 | 11-3161-0506-00 | Plug, cylinder cover | 3 |
| 7 | 11-3161-0507 | Positioning panel | 3 |
| 8 | 11-3161-0508 | Seal ring, cylinder cover | 3 |
| 9 | 11-3161-0509 | Discharge manifold | 1 |
| 10 | 11-3161-0510 | Valve spring | 6 |
| 11 | B34521-095-530-69 | O ring, 95*5.3 G | 3 |
| 12 | 11-3161-0511-00 | Valve assembly | 6 |
| 13 | 11-3161-0512 | Seal ring, valve cover | 3 |
| 14 | 11-3161-0513 | Valve cover | 3 |
| 15 | 11-3161-0514 | Seal ring, liner | 6 |
| 16 | 11-3161-0515 | Liner wear ring | 3 |
| 17 | 11-3161-0516 | Liner retainer ring | 3 |
| 18 | 11-3161-0517-00 | Liner retainer screw | 3 |
| 19 | 11-3161-0518 | Piston rod | 3 |
| 20 | 11-3161-0519-00 | Spraying pipe assembly | 1 |
| 21 | B34521-200-700-69 | O ring, 200*7.0 G | 3 |
| 22 | 11-3161-0520 | Locking Ring, Liner Retainer screw | 3 |
| 23 | 11-3161-0521-21 | Bi-metal liner 5 | 3 |
| 11-3161-0521-22 | Bi-metal liner 5 1/2 | ||
| 11-3161-0521-23 | Bi-metal liner 6 | ||
| 11-3161-0521-24 | Bi-metal liner 6 1/4 | ||
| 11-3161-0521-25 | Bi-metal liner 6 1/2 | ||
| 11-3161-0521-26 | Bi-metal liner 6 3/4 | ||
| 11-3161-0521-11 | Ordinary liner 5 | ||
| 11-3161-0521-12 | Ordinary liner 5 1/2 | ||
| 11-3161-0521-13 | Ordinary liner 6 | ||
| 11-3161-0521-14 | Ordinary liner 6 1/4 | ||
| 11-3161-0521-15 | Ordinary liner 6 1/2 | ||
| 11-3161-0521-16 | Ordinary liner 6 3/4 | ||
| 11-3161-0521-17 | Ordinary liner 7 | 3 | |
| 24 | 11-3161-0522-00 | Clamp assembly, piston rod | 3 |
| 25 | 11-3161-0523 | Splash Shield, liner | 3 |
| 26 | 11-3161-0524-00 | Piston | 3 |
| 27 | 11-3161-0542 | Bolt, 7/8-9UNC-2A*60 | 18 |
| 28 | 11-3161-0525-00 | Suction manifold | 1 |
| 29 | 11-3161-0526-00 | Shim | 4 |
| 30 | 11-3161-0527 | Guide, valve (upper) | 3 |
| 31 | 11-3161-0528 | Stud, 1 1/2-8UN-2A*265 | 16 |
| 32 | 11-3161-0501-06 | Nut, 1 1/2-8UN-2B(SPL) | 44 |
| 33 | 11-3161-0529 | Baffle | 3 |
| 34 | 11-3161-0530 | Bolt, 3/8-16UNC-2A*20 | 12 |
| 35 | 11-3161-0531 | Seal ring, piston | 3 |
| 36 | 11-3161-0532-00 | Nut, piston | 3 |
| 37 | B34521-190-700-69 | O ring, 190*7.0 G | 3 |
| 38 | 11-3161-0533-00 | Suction damper | 1 |
| 39 | B34521-345-700-69 | O ring, 345*7.0 G | 3 |
| 40 | 11-3161-0534 | Suction flange(Ⅰ) | 1 |
| 41 | 11-3161-0535 | Suction flange(Ⅱ) | 1 |
| 42 | 11-3161-0543 | Nut, 1 1/16-8UN-2B(SPL) | 36 |
| 43 | 11-3161-0544 | Bolt 1 1/16-8UN-2A*90 | 36 |
| 44 | 11-3161-0545 | Steel wire, Φ1.60 (L=1830) | 1 |
| 45 | 11-3161-0536 | Screw plug, NPT1 1/2 | 1 |
| 46 | 11-3161-0537 | Bolt, 1 1/2 | 12 |
| 47 | 11-3161-0546 | Sealant: | As required |
| 48 | 11-3161-0538 | Plug, suction let, 12" | 1 |
| 49 | 11-3161-0539 | Closure plate, discharge let, 5 1/8" | 1 |
| 50 | 11-3161-0540 | Washer, 39 | 30 |
| 51 | 11-3161-0541-00 | Spring guide | 3 |
| R1 | 11-3161-0501-02 | Stud, 1-8UNC(14UNS)-2A*185 | 36 |
| R2 | 11-3161-0501-03 | Nut, 1-8UNC-2B(SPL) | 36 |
| R3 | 11-3161-0501-04 | Stud, 1 1/2-8UN(12UNF)-2A*170 | 30 |
| R4 | 11-3161-0501-06 | Nut, 1 1/2-8UN-2B(SPL) | 60 |
| R5 | 11-3161-0501-05 | Stud, 1 1/2-8UN(12UNF)-2A*120 | 30 |
| R6 | 11-3161-0501-07 | Stud, 1 1/4-8UN(12UNF)-2A*195 | 12 |
| R7 | 11-3161-0501-08 | Nut, 1 1/4-8UN-2B(SPL) | 12 |
| No. | P/N | Description | Qty | Drawing Code |
| 1 | 11-3101-0201-00 | End cover, main bearing | 2 | GH3101-02.01.00 |
| 2 | 11-3101-0202 | Sleeve, main bearing (right) | 1 | GH3101-02.02 |
| 3 | 11-3101-0203 | Gasket | 2 | GH3101-02.03 |
| 4 | 11-3101-0204 | Insider retainer | 2 | GH3101-02.04 |
| 5 | 11-3101-0205-00 | Outside retainer | 3 | GH3101-02.05.00 |
| 6 | 11-3101-0206 | Connecting rod (eccentric strap) | 3 | GH3101-02.06 |
| 7 | 11-3101-0207 | Positioning ring (I) | 1 | GH3101-02.07 |
| 8 | 11-3101-0208-00 | Crankshaft, hollow | 1 | GH3101-02.08.00 |
| 9 | 11-3101-0209 | Positioning ring (2) | 1 | GH3101-02.09 |
| 10 | 11-3101-0210+2 | Big gear rim(widened) | 1 | GH3101-02.10B |
| 11 | 11-3101-0211 | Bolt, 1 1/4-8UN-2A*108 | 12 | GH3101-02.11 |
| 12 | 11-3101-0212-00 | Locknut, 1 1/4-8UN-2B | 12 | GH3101-02.12.00 |
| 13 | 11-3101-0213 | Spacer | 2 | GH3101-02.13 |
| 14 | 11-3101-0214 | Sleeve, main bearing (left) | 1 | GH3101-02.14 |
| 15 | 11-3101-0215 | Retainer | 2 | GH3101-02.15 |
| 16 | 11-3101-0216 | Bolt, 5/8-11UNC-2A*45 | 100 | GH3101-02.16 |
| 17 | 11-3101-0217 | Baffle | 2 | GH3101-02.17 |
| 18 | 11-3101-0218 | Bolt, main bearing, 2 1/2-8UN-3A | 4 | GH3101-02.18 |
| 19 | 11-3101-0219-00 | Shims | 4 | GH3101-02.19.00 |
| 20 | 11-3101-0220 | Screw, 5/8-11UNC-2A*100 | 4 | GH3101-02.20 |
| 21 | 11-3101-0221 | Bearing, eccentric wheel, 929/558.8QU | 3 | GH3101-02.21 |
| 22 | 11-3101-0222 | Main bearing, 3G4053156H | 2 | GH3101-02.22 |
| 23 | 11-3161-0224 | Lock wire, SZ-1.50 | 1 | GB/T343-1994 |
| 24 | 11-3161-0225 | Lock wire, SZ-3.00 | 1 | GB/T343-1994 |
| 25 | 11-3101-0223 | Sealant 242 | 0 | 242 |
| 26 | B0848-016-32 | Washer, 16 | 28 | GB/T848-1985 |
| No. | P/N | Description | Qty | Drawing Code |
| 1 | 11-3101-0301 | Key, 2"*2"*203 | 1 | GH3101-03.01 |
| 2 | 11-3101-0302-2 | Pinion shaft assembly(widened) | 1 | GH3101-03.02B |
| 3 | 11-3101-0303 | Sleeve, | 2 | GH3101-03.03 |
| 4 | 11-3101-0304 | End cover | 2 | GH3101-03.04 |
| 5 | 11-3101-0305 | Gasket | 2 | GH3101-03.05 |
| 6 | 11-3101-0306 | gasket | 2 | GH3101-03.06 |
| 7 | 11-3101-0307 | Bearing housing | 2 | GH3101-03.07 |
| 8 | 11-3101-0308 | retainer | 2 | GH3101-03.08 |
| 9 | 11-3101-0309 | gasket | 2 | GH3101-03.09 |
| 10 | 11-3101-0310-00 | Oil collector | 2 | GH3101-03.10.00 |
| 11 | 11-3161-1502 | Bolt, 1/2-13UNC-2A*35 | 24 | US standard |
| 12 | 11-3161-0315 | Bolt, 7/8-9UNC-2A*52 | 16 | US standard |
| 13 | 11-3101-0311 | Oil seal, 8.5"*10.5"*0.625" | 2 | GH3101-03.11 |
| 14 | 11-3101-0312 | Bearing, 4G32840H | 2 | GH3101-03.12 |
| 15 | B0093-22-59 | Washer, 22 | 16 | GB/T93-1987 |
| 16 | B0093-14-59 | Washer, 14 | 24 | GB/T93-1987 |
| 17 | 11-3101-0313 | Flange, cranking pump | 1 | GH3101-03.13 |
| 18 | 11-3161-0316 | Bolt, 5/8-11UNC-2A*50 | 3 | US standard |
| 19 | B0093-16-59 | Washer, 16 | 3 | GB/T93-1987 |
| No. | P/N | Description | Qty | Drawing Code |
| 1 | 11-3101-0401 | Crosshead | 1 | GH3101.04.01 |
| 2 | 11-3101-0402 | Slide, upper | 1 | GH3101.04.02 |
| 3 | 11-3101-0420 | Bolt, 1-8UNC-2Ax55 | 2 | US standard |
| 4 | 11-3101-0403 | End cover | 1 | GH3101-04.03 |
| 5 | B34521-175-355-69 | O-ring, 175×3.55G | 1 | GB/T3452.1-1992 |
| 6 | 11-3101-0404 | Stuffing Box | 1 | GH3101-04.04 |
| 7 | 11-3101-0405 | Seal ring | 1 | GH3101-04.05 |
| 8 | 11-3101-0406 | Oil seal | 1 | GH3101-04.06 |
| 9 | 11-3101-0407 | Pipe joint, NPT3/8x50.8 | 2 | GH3101-04.07 |
| 10 | 11-3101-0408 | Splashguard | 1 | GH3101-04.08 |
| 11 | 11-3101-0409 | Extension rod | 1 | GH3101-04.09 |
| 12 | 11-3101-0410 | Crosshead pin | 1 | GH3101-04.10 |
| 13 | 11-3101-0421 | Bolt, 1-8UNC-2Ax65 | 8 | US standard |
| 14 | 11-3101-0411 | Adjusting shim | 2 | GH3101-04.11 |
| 15 | 11-3101-0412 | Slide, lower | 1 | GH3101-04.12 |
| 16 | 11-3101-0413 | Slide retainer plate | 8 | GH3101-04.13 |
| 17 | B34521-140-700-69 | O-ring, 140×7.0G | 1 | GB/T3452.1-1992 |
| 18 | 11-3101-0422 | Bolt, 3/8-16UNC-2Ax35 | 4 | US standard |
| 19 | B0093-10-59 | Washer, 10 | 4 | GB/T93-1987 |
| 20 | 11-3101-0414 | Locking Spring | 1 | GH3101-04.14 |
| 21 | 11-3101-0423 | Screw, 3/4-10UNC-2Ax55 | 8 | US standard |
| 22 | 11-3101-0415 | Gasket | 1 | GH3101-04.15 |
| 23 | 11-3101-0416 | Crosshead Pin Cap | 1 | GH3101-04.16 |
| 24 | 11-3101-0417 | Crosshead bearing, 5G254936Q | 1 | GH3101-04.17 |
| 25 | 11-3101-0418 | Oil seal, 4.5"×5.5"×0.5" | 2 | GH3101-04.18 |
| 26 | 11-3101-0419-00 | shims | 8 | GH3101-04.19.00 |
| 27 | 11-3101-0223 | Sealant | 1 | 242 |
| 28 | B34521-115-530-69 | O-ring, 115×5.30G | 1 | GB/T3452.1-1992 |
| No. | P/N | Description | Qty | Drawing Code |
| 1 | 11-3101-0501-00 | Cylinder assembly | 3 | GH3101-05.01.00 |
| 2 | 11-3101-0502 | Cylinder Cover, Threaded ring | 3 | GH3101-05.02 |
| 3 | 11-3101-0503 | Cylinder Cover, | 3 | GH3101-05.03 |
| 4 | 11-3101-0504 | Seal ring, cylinder cover | 6 | GH3101-05.04 |
| 5 | 11-3101-0505 | Plug, cylinder cover | 3 | GH3101-05.05 |
| 6 | 11-3101-0506 | Puller | 3 | GH3101-05.06 |
| 7 | B34521-975-355-69 | O-ring, 97.5×3.55G | 3 | GB/T3452.1-1992 |
| 8 | 11-3101-0507 | Blind plate, discharge, 5 1/8" | 1 | GH3101-05.07 |
| 9 | 11-3101-0508 | Discharge manifold | 1 | GH3101-05.08 |
| 10 | 11-3101-0509 | Seal ring, valve cover | 3 | GH3101-05.09 |
| 11 | 11-3101-0510 | Stud, 1 1/2-8UN-2A*262 | 16 | GH3101-05.10 |
| 12 | 11-3101-0501-03 | Nut, 1 1/2-8UN-2B(SPL) | 32 | GH3101-05.01.03 |
| 13 | 11-3101-0511 | Valve cover | 3 | GH3101-05.11 |
| 14 | 11-3101-0512 | Guide, valve stem | 3 | GH3101-05.12 |
| 15 | 11-3101-0513-00 | Spring guide | 3 | GH3101-05.13.00 |
| 16 | 11-3101-0514 | Baffle | 3 | GH3101-05.14 |
| 17 | 11-3101-0515 | Bolt, 3/8-16UNC-2A*20 | 12 | GH3101-05.15 |
| 18 | 11-3161-0545 | Stainless steel wire, φ1.60(L=1830) | 1 | GB/T4240-1993 |
| 19 | 11-3101-0516 | Valve spring | 6 | GH3101-05.16 |
| 20 | 11-3101-0517-00 | Valve assembly,(API 6#) | 6 | GH3101-05.17.00 |
| 21 | 11-3101-0518-00 | Nut, piston | 3 | GH3101-05.18.00 |
| 22 | 11-3101-0519-00-1 | Piston | 3 | GH3101-05.19.00A |
| 23 | 11-3101-0520 | Seal ring, piston | 3 | GH3101-05.20 |
| 24 | 11-3101-0521 | Piston rod | 3 | GH3101-05.21 |
| 25 | 11-3101-0522-01-1 | Ordinary liner 4 3/4 | 3 | GH3101-05.22A |
| 11-3101-0522-02-1 | Ordinary liner 5 | |||
| 11-3101-0522-03-1 | Ordinary liner 5 1/2 | |||
| 11-3101-0522-04-1 | Ordinary liner 6 | |||
| 11-3101-0522-05-1 | Ordinary liner 6 1/4 | |||
| 11-3101-0522-06-1 | Ordinary liner 6 1/2 | |||
| 11-3101-0522-07-1 | Ordinary liner 6 3/4 | |||
| 11-3101-0522-01 | Bi-metal liner 4 3/4 | GH3101-05.22 | ||
| 11-3101-0522-02 | Bi-metal liner 5 | |||
| 11-3101-0522-03 | Bi-metal liner 5 1/2 | |||
| 11-3101-0522-04 | Bi-metal liner 6 | |||
| 11-3101-0522-05 | Bi-metal liner 6 1/4 | |||
| 11-3101-0522-06 | Bi-metal liner 6 1/2 | |||
| 26 | 11-3101-0523-00 | Spraying pipe assembly | 1 | GH3101-05.23.00 |
| 27 | 11-3101-0524-00 | Clamp assembly, piston rod | 3 | GH3101-05.24.00 |
| 28 | 11-3101-0525 | Splash Shield, liner | 3 | GH3101-05.25 |
| 29 | 11-3101-0526 | Fixing clamp | 3 | GH3101-05.26 |
| 30 | 11-3101-0527-00 | Guide, valve stem(lower) | 3 | GH3101-05.27.00 |
| 31 | B34521-190-700-69 | O-ring, 190×7.0G | 3 | GB/T3452.1-1992 |
| 32 | 11-3101-0536 | Bolt, 7/8-9UNC-2Ax55 | 18 | US standard |
| 33 | 11-3101-0528-00 | Suction manifold | 1 | GH3101-05.28.00 |
| 34 | 11-3101-0529-00 | Suction dampener | 1 | GH3101-05.29.00 |
| 35 | 11-3101-0530-00 | Shims | 4 | GH3101-05.30.00 |
| 36 | 11-3161-0544 | Bolt, 1 1/16-8UN-2A*90 | 36 | US standard |
| 37 | 11-3161-0543 | Nut, 1 1/16-8UN-2B(SPL) | 36 | US standard |
| 38 | B34521-345-700-69 | O-ring, 345×7.0G | 3 | GB/T3452.1-1992 |
| 39 | 11-3101-0531 | Suction flange(Ⅰ) | 1 | GH3101-05.31 |
| 40 | 11-3101-0532 | Suction flange(Ⅱ) | 1 | GH3101-05.32 |
| 41 | 11-3101-0533 | Plug screw, NPT1 1/2 | 1 | GN3101-05.33 |
| 42 | 11-3101-0534 | Washer, 39 | 24 | GH3101-05.34 |
| 43 | 11-3101-0535 | Blind plate, suction inlet, 12" | 1 | GH3101-05.35 |
| 44 | 11-3161-0546 | Sealant | 1 | 277 |
| CONTINENTAL EMSCO FC-2200 FLUID END MODULE & ACCESSORIES | |||
| ITEM # | PART # | DESCRIPTION | QTY PER PUMP |
| - | 0-6323-0100-20 | ASSY, FLUID END COMPLETE (INCLUDES DISCHARGE MANIFOLD) | 1 |
| 1 | 0-6323-0108-00 | MODULE, DISCHARGE STUDDED | 3 |
| 2 | 0-6323-0109-00 | MODULE, SUCTION STUDDED | 3 |
| 3 | 0-6323-0087-90 | RETAINER, THREADED | 6 |
| 4 | 0-6323-0086-90 | RING, THREADED | 6 |
| 5 | 0-6323-0083-00 | COVER, VALVE POT | 6 |
| 6 | 0-6323-0103-00 | GUIDE W/ BUSHING, VALVE | 6 |
| 7 | 0-6323-0126-00 | HANDLER, VALVE POT | 6 |
| 8 | 0-6323-0107-20 | COVER, LINER END | 3 |
| 9 | 0-6323-0129-00 | DISC, BAFFLE | 3 |
| 10 | 0-6323-0085-00 | MANIFOLD, SUCTION | 1 |
| 11 | 0-6316-0105-95 | FLANGE, SUCTION | 1 |
| 12 | 0-6317-0074-95 | FLANGE, BLIND | 1 |
| 13 | 0-6323-0084-10 | DISCHARGE MANIFOLD, 7500 PSI | 1 |
| 14 | 0-6323-0097-90 | WEAR PLATE | 3 |
| 15 | 0-6323-0096-00 | RING, LINER THREAD | 3 |
| 16 | 0-6323-0099-00 | LINER LOCK | 3 |
| 17 | 0-6323-0093-00 | RETAINER, VALVE GUIDE | 6 |
| 18 | 0-6323-0128-00 | SEAL, SUCTION TO DISCHAGE MODULE | 3 |
| 19 | 0-6323-0127-00 | SEAL, WEAR PLATE & LINER - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS) | 6 |
| 20 | 0-7602-1600-47 | O-RING (LINER LOCK RING) | 3 |
| 21 | 7817600456 | O-RING (SUCTION MANIFOLD) | 3 |
| 22 | 0-7602-1600-61 | O-RING (SUCTION MANIFOLD TO F.E.) | 3 |
| 23 | 0-7602-1600-30 | O-RING (DISCHARGE MANIFOLD TO F.E.) | 3 |
| 24 | 0-7501-0051-00 | SCREW, RETAINER | 24 |
| 25 | 7822095 | WIRE, SAFETY SST | 72 |
| 26 | 0-6323-0101-00 | RING, LINER LOCK | 3 |
| 27 | 7000534 | SCREW, SUCTION FLANGE HEX HD | 36 |
| 28 | 0-7601-0630-20 | NUT, HEX 1" - 8 | 36 |
| 29 | 0-6323-0125-00 | SEAL, VALVE POT COVER | 6 |
| 30 | 0-7601-0333-30 | SCREW, SUCTION MANIFOLD TO F.E. | 18 |
| MISSION "L" FOR NATIONAL 12-P-160 (7500 PSI WORKING PRESSURE) FLUID END MODULE & ACCESSORIES | |||
| ITEM # | OEM PART # | MISSION PART # | QTY PER PUMP |
| 80704032 | ASSY, FLUID END COMPLETE (INCLUDES ITEMS 1-27) ENOUGH FOR 1 PUMP | 1 | |
| 80704035 | ASSY, FLUID END COMPLETE W/ BLAK-JAK LINER RETENTION SYSTEM | 1 | |
| 80704038 | ASSY, FLUID END COMPLETE W/ ROUGHNECK VALVES L/ LINER BUSHING & NUT (#'S 19, 20) | 1 | |
| 1 | /80704000 | MODULE, DISCHARGE STUDDED (INCLUDES ITEMS 1, 3-10) | 3 |
| 2 | 80704001 | MODULE, SUCTION STUDDED (INCLUDES ITEMS 2, 7-8) | 3 |
| 3 | 80704002 | STUD, DISCHARGE TO SUCTION MODULE | 24 |
| 4 | 75510126 | NUT, HEAVY HEX | 24 |
| 5 | 80704003 | THREADED RING | 6 |
| 6 | 80704004 | THREADED CAP | 6 |
| 7 | /80704005 | VALVE COVER | 6 |
| 8 | 80704006 | DISCHARGE MANIFOLD (7500 PSI WORKING PRESSURE) | 1 |
| 9 | 80702011 | STUD, DISCHARGE MANIFOLD | 12 |
| 10 | 0-7601-0630-24 | NUT, DISCHARGE MANIFOLD STUD | 12 |
| 11 | 12PVGASW | GUIDE, VALVE | 6 |
| 12 | PZ789VGI* | BUSHING, VALVE GUIDE | 6 |
| 13 | 7007303 | SCREW, VALVE GUIDE | 12 |
| 13 | PZ789VGI* | BUSHING, VALVE GUIDE | 6 |
| 14 | PEP75 | CAPSCREW, LINER RETAINER | 18 |
| 15 | 2408029 | ||
| 16 | 6300220 | NUT, POWER FRAME STUD | 30 |
| 17 | PEP70 | DOWELL PIN | 6 |
| 18 | 80700014 | STUD, THREADED RING | 72 |
| 19 | 6300240 | NUT, THREADED RING STUD | 72 |
| 20 | SUCTION MANIFOLD | 1 | |
| 21 | 1290344 | SEAL, DISCH TO SUC & WEARPLATE - RUBBER (SEE DATASHEET FOR ALT MATLS) | 6 |
| 22 | 7207119 | SEAL, VALVE COVER - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS) | 6 |
| 23 | 99609235 | SEAL, DISCHARGE MANIFOLD | 3 |
| 24 | 1540851 | SEAL, SUCTION MANIFOLD | 3 |
| 25 | 700048511 | CAPSCREW, SUCTION MANIFOLD | 3 |
| 26 | PP6021260SW | PLATE, WEAR | 3 |
| 27 | 12PLASW | RETAINER, LINER FLANGE | 3 |
| 28 | 12PLANSW | NUT, LINER RETAINER | 3 |
Contact Details
Qingdao National Premium Oilwell Machinery Co.,Ltd
Contact Person: Mr. Eric
Tel: 0086-15376875239
Other Products
-
LS F-1600/F-1300/F-1600L SLUS Mud Pump, MUD PUMP FLUID END MODULE, LINER, PISTON, BOMCO F1600 MUD PUMP, F1600HL PUMP
-
LEWCO-W2215 Mud Pump, WH1612 MUD PUMP, WH1312 MUD PUMP, WH-2214 MUD PUMP FLUID END MODULE, LINER, PISTON
-
SOUTHWEST 8488-25A A-1700-PT / A-1400 MUD PUMP FLUID END 7500 PSI, SOUTHWEST A1700PT MUD PUMP LINER, PISTON
-
TSC, NATIONAL 14P220 Mud Pump, 12P160 MUD PUMP, WF1300 MUD PUMP. WF1600 MUD PUMP, WF2000 MUD PUMP, WF2200 MUD PUMP
-
National 12P160 Mud Pump Zirconia Liners, NATIONAL 14P-220 MUD PUMP, 10P-130 MUD PUMP, 9P100 MUD PUMP, 8P80 MUD PUMP
-
W-2214 MUD PUMP, EMSCO FB1600 Mud Pump, FB1300 mud pump, F1000 mud pump, Cameron CMP2200 Mud Pump , FC2200 mud pum