Premium manufactures a wide variety of valves and seats, for the following applications, among others: workover pumps; high pressure well service fracturing pumps; cementing pumps; and mud pumps.

 

Cross Arms/4-Web Valve & Seat

The Cross Arms Valve is a 4-Web Center Guided Valve System. This Valve has a replaceable Insert that is retained by a screw on plate with hammer lugs. Available in heavy duty standard temperature and high temperature versions.

Oxide coated to fight corrosion while in storage. Available with standard API seats and “modified” API seats.

Design Benefits:

Ø Large metal-to-metal seat bearing area, longer wear life for metal wear areas

Ø 4-Web Seat Design Maximizes Bearing Area and makes Seat Pulling easier

Ø This stem guided valve and seat assembly weightless and provides a reasonable value at an economical price.

Operating Temperature:

Ø Standard Insert – Temperature Up to 160°F (71°C)

 

Ø High temperature (HC) Insert - 200°F (93°C)

 

Bonded Valve

Premium introduces a new and improved full open valve with bonded insert. The bonded valve has replaced the slip-on insert to provide a tighter fit. This design is permanently bonded to the valve body. This reduces the tendency for fluids to penetrate between the polyurethane insert and the valve body; preventing failure. This bonded polyurethane insert is also used to minimize shock when the valve closes. The full open design of this bonded valve provides maximum fluid flow, and has a longer operation life due

 

to its increased structural strength. This is the result of using a forged solid body instead of a two piece design. This is done to provide durability at high pressures. The large metal- bearing area on the valve seat surface promotes a longer service life.

Design benefits include:

Ø Very high tensile strength Ø Enhanced Sealing Capabilities

 

Ø Improved Shock Absorption Ø Premature sealing failure prevention

Double Angle Valve

The Double Angle Valve is a 3-Web Center Guided Valve System. This Valve has a replaceable “Snap-In” Insert, available in standard temperature and high temperature versions. Oxide coated to fight corrosion while in storage.

 

Available with standard API seat and “modified” API seats.

 

Design Benefits Include:

 

Ø Large metal-to-metal seat bearing area, longer wear life for metal wear areas.

Ø 3-web seat design maximizes bearing area and makes seat pulling easier.

Ø Lightweight design for stable operation at high pump speeds.

 

Operating Temperatures:

 

Ø Standard Insert – Temperature Up to 160°F (71°C)

 

Ø High temperature (HC) Insert - 200°F (93°C)

 

Full Open Mud Pump Valves & Seats

 

Premium is the leader in full open valve and seat supply; the first valves and seats in the industry rated for continuous service at 7500 psi. The Premium design incorporates many of the features proven in the Premium Well Service Valves & Seats

 

 

Made Strong To Last Long

The Heavy Duty Valve is a bonded urethane valve that will hold up to the most hostile drilling environment. The HD Valve will withstand High Pressure, High Temperature and High Solids.

Superior Performance, Long Run Life, Excellent Abrasion Resistance and Sealing Surface coupled with the highest rated chemically resistant urethane make the HD Valve an excellent choice for any drilling application.

 

Features :

· Unique urethane bonding anchor

· Reliable with the highest quality control

· High Temperature Urethane

· Excellent extrusion and abrasion resistance

· The strongest urethane bond of any valve for increased service life and a stronger seal

· Excellent chemical resistance

· 7500+ psi rated

· 300°F rated urethane

· Carburized and heat treated

 

 

Southwest ND Style Valve

The ND (Roughneck Style) Valve is a full open type valve that is fully interchangeable with Roughneck valves and seats. The full open design of the seat promotes even loading of the seat deck in the fluid end module. This valve is available with a standard polyurethane insert or a high temperature insert (add “HC” to the end of the valve part number. Ex: ND-7V2HC)

 

Design benefits include:

 

 

Ø Two piece welded design is better for high pumping speeds.

 

Ø Balanced insert and seat area for better sealing & loading characteristics

 

Ø Standard Insert – Temperature Up to 160°F (71°C) with Max Pressure of 7500 PSI

 

Ø High Temp. (HC) Insert - Temperature 300°F (149°C) with Max Pressure of 7500 PSI

 

 

 

Well Service Pump Valve

 

SPM Well Service Pump Valve is designed for maximum flow characteristics. SPM Well Service Pump Valve combines the strength of a forged alloy steel upper body with

precision casting to minimize flow restriction and fluid turbulence.

• Low cost and superior performance
• Increased resistance to abrasion and extrusion

 

        SOUTHWEST 8477-A

                              Gardner Denver PZ-11/PZ-10

ITEM	P/N	DESCRIPTION	QTY
	8477A	FLUID END ASSEMBLY: (CONSISTS OF ITEMS 3,4,17,18,19,20, 21, 22, 23, 24, 25, 26, 27, 28, 29,31,32,33, 34, 35,38,39)
1	1377YXX	LINER (REFER TO GUIDE TO ORDERING CHART FOR TYPE (Y) AND FOR SIZE (XX))	3
2	2975	LINER SEAL	3
3	8477-3	WEARPLATE	3
4	2930-08	WEARPLATE GASKET	3
5	XX-BYY	PISTON (REFER TO GUIDE TO ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY))	3
5A	2932	PISTON BUSHING (FROM 1-5/8” TO 1-1/2” STRAIGHT BORE)	3
6	568-225	PISTON O-RING	3
7	6278-25	PISTON ROD (WITH ELASTIC STOP NUT)	3
8	API-4ESN	PISTON ROD ELASTIC STOP NUT	3
9	1290-2	PISTON ROD CONNECTING STUD	3
10	6279-1	SUB ROD (CLAMP TYPE)	3
10A	6280-1	SUB ROD (SCREW TYPE)	3
11	1277CW	ROD CLAMP (CONSIST OF 11A, 11B, 11C)	3
11A	1200H30	HOSE (1/2” X 30” WITH 1/2” MALE X 3/8” MALE CONNECTIONS)	3
11B	1200120	DUAL SPRAY PIPE	3
11C	4018-96	ROD CLAMP BOLT (5/8” X 5-1/2” GRADE 8 BOLT W/ LOCK NUT AND WASHER)	6
12	1200G77	PONY ROD (CLAMP TYPE)	3
12A	1200G88	PONY ROD (SCREW TYPE)	3
13		VALVE	6
14		VALVE INSERT (IF REQUIRED)	6
15		VALVE SPRING	6
16		VALVE SEAT	6
	SWTM1700	HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION OF CATALOG FOR DETAILS)
	4475-1A	SOUTHWEST HP QUICK-CHANGE VALVE COVER ASSEMBLY: (CONSISTS OF ITEMS 17-24)
17	4475	THREADED FLANGE	6
18	4575	SCREW GLAND	6
19	4675-1A	PLUG (COMPLETE WITH VALVE GUIDE, SCREWS, AND BUSHING)	6
20	P129	HP VALVE COVER PLUG SEAL (P129U URETHANE AVAILABLE)	6
21	4775R	VALVE GUIDE (COMPLETE WITH BUSHING #4700I)	6
22	4700I	VALVE GUIDE BUSHING (4700IU URETHANE AVAILABLE)	6
23	4018-88	VALVE GUIDE SCREW	12
24	4015-2	VALVE COVER STUD (WITH SW PART# HHN1250-7 1-1/4”-7” HEAVY HEX NUT)	72
25	4018-35	POWER END STUD (WITH SW PART# HHN1250-7 1-1/4” – 7 HEAVY HEX HUT)	24
26	4018-34	LINER RETAINER FERRY HEAD CAP SCREW (WITH SW PART# HHN1250-7 1-1/4” – 7 HEAVY HEX NUTS)	24
27	6477	LINER RETAINER FLANGE	3
28	4016-97	SUCTION MODULE STUD (WITH SW PART# HHN1500-8 1-1/2” – 8 HEAVY HEX NUT)	18
29	4017-77	SUCTION MANIFOLD CAP SCREW (WITH LOCK WASHER)	24
30	8577	SUCTION MANIFOLD (FRONT OR SIDE INLET)	1
31	AJO245	SUCTION MANIFOLD SEAL	3
32	8477-2S	SUCTION MODULE (STUDDED ONLY)	3
33	8477-1D	DISCHARGE MODULE (STUDDED ONLY)	3
34	8488-5	DOWEL PIN	6
35	2988	MODULE SEAL	3

 

 

                                                                        SOUTHWEST 8488-25A

Oilerll A-1700-PT/A-1400-PT

ITEM	P/ N	DESCRIPTION	QTY
	8488-25A	FLUID END ASSEMBLY: (CONSISTS OF ITEMS: 3, 4, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 34, 35, & 36)
1	1388-XX	LINER (REFER TO GUIDE FOR ORDERING CHART FOR TYPE (G); (Y); AND FOR BORE SIZE (XX)	3
2	2974-XX	LINER SEAL (ALSO AVAILABLE IN URETHANE)	3
3	8488-28	WEARPLATE	3
4	2988	WEARPLATE AND MODULE SEAL	9
5	XX-BYY	PISTON (REFER TO GUIDE FOR ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY)	3
6	568-225	PISTON O-RING	3
7	1290HW25	PISTON ROD (WITH 1 ½-8 ELASTIC STOP NUT)	3
8	API-4ESN	PISTON ROD ELASTIC STOP NUT	3
9	1290W2	PISTON ROD CONNECTING STUD	3
10	1290HW1	SUB ROD	3
11	1290CW	ROD CLAMP (CONSIST OF 11A, 11B, 11C) (FOR CLAMP ONLY, USE 1290C)	3
11A	1200H30	HOSE (1/2” X 30” WITH 1/2” MALE X 3/8” MALE CONNECTIONS)	3
11B	1200120	PIPE (3/8” X 12” GALVANIZED AND THREADED ON ONE END)	3
11C	4018-94	ROD CLAMP BOLT (5/8-11 GRADE 8 BOLT WITH LOCK NUT AND WASHER)	6
12	1200G90	PONY ROD	3
13		VALVE	6
14		VALVE INSERT (IF REQUIRED)	6
15		VALVE SPRING	6
16		VALVE SEAT	6
	SWTM1700	HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION IN CATALOG)	1
17	4488-25	THREADED FLANGE	6
18	4588-25	SCREW GLAND	6
19	4690-25A	PLUG (COMPLETE WITH VALVE GUIDE; BUSHING; AND SCREWS) INCLUDES ITEMS 21, 22, & 23	6
20	P115	HP VALVE COVER PLUG SEAL (ALSO AVAILABLE IN URETHANE PART# P115U)	6
21	4788R-25	VALVE GUIDE (COMPLETE WITH BUSHING #4700I)	6
22	4700I	VALVE GUIDE BUSHING (ALSO AVAILABLE IN URETHANE PART # 4700IU)	6
23	4018-18	VALVE GUIDE SCREW	12
24	4015-2	VALVE COVER STUD (WITH SW PART# HHN1250-7 1 ¼-7 HEAVY HEX NUT)	72
25	4020-5	POWER END STUD (WITH SW PART# HHN1750-8 1 ¾-8 HEAVY HEX NUT)	12
26	6588-1	LINER RETAINER NUT	3
27	8488-7	LINER RETAINER CAPSCREW	9
28	6488-25	LINER RETAINER FLANGE	3
29	4016-80	LINER RETAINER SOCKET HEAD CAP SCREW	24
30	4020-4	SUCTION MODULE STUD (WITH SW PART# HHN1750-8 1 ¾-8 HEAVY HEX NUT)	18
31	4018-70	SUCTION MANIFOLD CAP SCREW	24
32	8588-50A	SUCTION MANIFOLD	1
33	80102003	SUCTION MANIFOLD SEAL	3
34	8488-26	SUCTION MODULE	3
35	8488-27	DISCHARGE MODULE	3
36	8488-5	DOWEL PIN	6
37	8388-25A	DISCHARGE MANIFOLD	1
38	4019-60	DISCHARGE MANIFOLD STUD (WITH SW PART# HHN1250-7 1 ¼-7 HEAVY HEX NUT)	18
39	568-445	“O” RING – WEAR PLATE O.D. RETAINER	3
40	2932	PISTON BUSHING (1 5/8 TO 1 ½ DIA.)	3

 

FB1300/1600 Mud Pump

 

"L" MODULE FOR EMSCO FB-1300, FB-1600				QTY PER PUMP
FLUID END MODULE & ACCESSORIES
ITEM #	OEM PART #	MISSION PART #	DESCRIPTION
		FEMFB13ASSYSW	FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEMS: 1 - 27)	3
1	8490-1D	FEMFB13DISSW	MODULE, DISCHARGE STUDDED (INCLUDES ITEMS:1, 3-11)	3
2	8490-2S	FEMFB13SUCSW	MODULE, SUCTION STUDDED (INCLUDES ITEMS: 2, 5, 6, & 27)	3
3	4016-97	OWA17DSUCSSW	STUD, DISCHARGE TO SUCTION MODULE	18
4		EMSF1000PFSN	NUT, DISCHARGE TO SUCTION STUD	18
5	4015-2	OWA17TRSSW	STUD, THREADED RING	72
6		PZ789GPFSN	NUT, THREADED RING STUD	72
7	4016-9	EMSFB13PFSSW	STUD, POWER FRAME	18
8		EMSF1000PFSN	NUT, POWER FRAME STUD	18
9	4017-36	PEP80	CAPSCREW, LINER RETAINER FLANGE (SOCKET HEAD)	24
10	4017-46	FB1300DMSSW	STUD, DISCHARGE MANIFOLD	12
11		IDT800TRSN	NUT, DISCHARGE MANIFOLD STUD	12
12	8488-5	PEP70	PIN, DOWELL	6
13	2988	1290344	SEAL, SUC TO DISCH MOD & WEAR PLATE - RUBBER (SEE DATASHEET FOR ALT MATLS)	6
14	8422-3	EMSF1000ARSW	RING, LINER RETAINER PILOT	3
15	8490-3	EMSFB13WPSW	PLATE, LINER WEAR	3
16	6490-3	EMSFB13LRPSW	FLANGE, LINER RETAINER	3
17	6590-1	EMSFB13LLSW	NUT, LINER LOCK	3
18	P-129	07207129	GASKET, VALVE COVER - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS)	6
19	4016-99	PEP73	CAPSCREW, VALVE GUIDE	12
20	4700-I	PZ789VGI	BUSHING, VALVE GUIDE	6
21	4775-2R	EMSFB13VGASW	GUIDE, VALVE (INCLUDES ITEMS 20, 21)	6
22	4675-2A	EMSFB13VCASW	PLUG, VALVE COVER (INCLUDES ITEMS 19-22)	6
23	4475	OWA17FLGSW	RING, THREADED	6
24	4575	OWA17CAPSW	CAP, THREADED	6
25	568-343	99609343	GASKET, DISCHARGE MANIFOLD	3
26	568-442	99609442	GASKET, SUCTION MANIFOLD	3
27	4018-19	700048511	CAPSCREW, SUCTION MANIFOLD	18

 

 

 

 

 

 

 

 

 

Premium's zirconia liner offers life time cost savings, significantly longer service, better performance and safer operation than those made of more commonly used alumina ceramic. Premium's zirconia liner is a proprietary Zirconium-based matrix that has significantly improved mechanical characteristics.

 

◎ Zirconia has three important property advantages compared to alumina.

◎ Zirconia exhibits better impact strength.

◎ Zirconia is harder than alumina.

◎ Zirconia can be honed to finer surface finishes than alumina. Finished to 4 RMS, ◎Zirconia liners - provide a surface finish that's three to four times finer than alumina.

 

All three of these property advantages translate to lower ownership costs. The improved wear directly extends the service life of the sleeve, while the improved impact strength cuts down on the significant costs of replacing broken liners in the field. The surface finish improvements, meanwhile, have an indirect effect. The finer surface finish means less friction with the elastomer-and-metal pump pistons, which in trun extends piston life and reduces pump-cooling requirements.

 

◎ HP design with shoulder-on-hull design to prevent sleeve slippage

◎ Reduced liner and piston wear

◎ Rated for all drilling operations up to 7500 PSI

◎ Bore hardness of 92-94 Rockwell

◎ ID tolerances of +.010”/ -.000”

◎ Surface finish of 4 - 8 RMS

◎ Hardness i s HV 0.3 kg/mm – 1100/1200 ( 92 - 94 Rc)

◎ High pressure design to prevent slippage

◎ Liner sizes are available from 4½” to 7” for all popular mud pumps

 

 

 

 

Parts are available for these popular pump models:

BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600

 

Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,

 

National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,

 

Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,

Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT

 

Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200

 

Russian Mud Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L, NB125, NB80, NB50, NB32

 

WEATHERFORD/Ellis Williams: E-447, E-2200

 

Drillmec Mud Pump: 9T1000, 12T1600, 7TS600, 7TS500, 9T800

 

Romania Mud Pump: 3PN-1000, 3PN-1600, 3PN-2000

 

And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.

 

 

1,Plunger Size 3.38” - 4.00” Valve Part No. P107185 Seat Part No. P107802

Insert Part No. P107186 Spring

2,Plunger Size 4.50” Valve Part No. P107181 Seat Part No. P107180

Insert Part No. P107182 Spring

3,Plunger Size 5.00” - 6.00” Valve Part No. P107188 Seat Part No. P107187

Insert Part No. P107189 Spring4P102382

SPM2000

1,Plunger Size 3.75" Plunge Part No 3P103887

2,Plunger Size 4.00" Plunge Part No 3P100339

3,Plunger Size 4.50" Plunge Part No 3P100654

4,Plunger Size" 5.00" Plunge Part No 3P100233

5,Plunger Size" 5.50 Plunge Part No 3P107060

6,Plunger Size" 5.75" Plunge Part No 3P107061

7,Plunger Size 6.00 Plunge Part No 3P107062

SPM

TWS 250 Plunger Size 1.75"-3" 3.25"-4"

TWS 400 Plunger Size 2 .50"-3" 3 .50"-4 .50”

TWS 500LW-600 Plunger Size 2 .75" 3"-4 .75"

TWS 600S Plunger Size 2 .50"-3" 3.50"-4 .50"

TWS 900 Plunger Size 3.50"-4"

TWS 1250LW Plunger Size 4"

OPI880 Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0”

TWS1000LW,TWS1300

Plunger Size 3.75" 4.00” 4.5” 5.0:” 5.50” 5.75” 6.0” 6.5 “ 6.75”

TWS1600 Plunger Size 3.5” 3.75” 4.0” 4.50” 5.0” 5.5” 5.75 “6.0”

TWS1800 Plunger Size 3.5” 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0”

TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”

QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”

QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”

5.50” 5.75” 6.0”

TWS2250 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”

QWS 2000 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5”

QWS 2500 Plunger Size 3.75” 4.0” 4.5” 5.0” 5.50” 5.75” 6.0” 6.5

 

 

 

Brewster ® Mud Pumps B-550 • B-750 • B-1000 • 1100T • B-1300

Continental Emsco ® Mud Pumps F-350 • F-500 • F-650 • F-800 • F-1000 • FA-1300 • FB-1600 FB1600

Gaso ® Mud Pump 1563 • 1740-55 • 1844-60 • 2010-50 • 2200-49 • 2651 • 2652

Gardner Denver ® Mud Pumps

PAH • PZ-7 PZG • PZ-8 PZH • PZ-9 PZJ • PZ-10 PZK • PZ-11 PZL

Gardner Denver ® Well Service TEE • PE-5 • PA-8 • PAH • PJ-8 • TGF-225

Gardner Denver ® Continuous Duty GD-55T • GD-60T • GD-100T • GD-125T • GD-150T • GD-180T • GD-200T

Ideco ® Mud Pumps MM-200 • MM-300 • MM-500 • MM-500F • MM-550

Ideco ® Mud Pumps MM-550F • MM-700 • MM-700F • T-500

Ideco ® Mud Pumps T-500 • T-800 • T-1000 • T-1300 • T-1600

National ® J Series Mud Pumps J-30 • J-60 • J-100 • J-165 • J-275 • J-375 • J-625 • JWS-340 • JWS-400

National ® Mud Pumps K-280 • K-380 • K-500 • K-500A • K-700A

National ® P Series Mud Pumps 7P-50 • 8P-80 • 9P-100 • 10P-130 • 12-P-160 / 12P-160 / 12P160

Oilwell ® Mud Pumps A-350-PT • 560-PT • A-560-PT • 850-PT • A-850-PT • 1100-PT

Oilwell ® Mud Pumps A-1100-PT • 1400-PT • A-1400-PT • 1700-PT • A-1700-PT / A1700-PT

Oilwell ® Plunger Pumps C-323 through B-558 • SA-640-50 through SB-644-B

OPI ® Mud Pumps 350-D • 00-DL • 700-HDL • 1000-HDL

Wheatley ® Mud Pumps 1036 • 6070 • 7024 • 7036

Fluid End Modules

National® - Oilwell® - Continental Emsco® - Gardner Denver® - Ideco® - Skytop Brewster®

Pulsation Dampener

Hydril Type "K" Pulsation Dampener

Popular Mud Pump Spare Parts

 

Mud Pump Manufactures and Models include:

Brewster Mud Pumps

B-550 | B-750 | B-1000 | 1100T | B-1300

Continental Emsco Mud Pumps

FF-FXF | FG-FXG (A thrugh L) | FD-FXX | FC-FXX | FD-FXD | FC-FXD | FY-FXD

Continental Emsco Mud Pumps

GP-GXP | GR-GXP | GP-GXR | GR-GXR |PA-8 | PAH

Continental Emsco Mud Pumps

PJ8 | PZ-7 | PZ-8 | PZ-9 | PZ-10 | PZ-11 | PXL

Ellis Williams (Luko) Mud Pumps

WW-440 | 14W-400 | 15W-600 | 9W-1000

Gaso Mud Pump

1563 | 1740-55 | 1844-60 | 2010-50 | 2200-49 | 2651 | 2652

Gardner Denver Mud Pumps

FF-FXF;FG-FXG;A thru L FD-FXX FC-FXX FD-FXD FC-FXD FY-FXD GP-GXP GR-GXP GP-GXR GR-GXR PA-8 PJ8 PZ-7 PZ-8 PZ-9 PZ-10 PZ-11 PXL

 

Ideco Mud Pumps

MM-200 | MM-300 | MM-500 | MM-500F | MM-550

Ideco Mud Pumps

MM-550F | MM-700 | MM-700F | T-500

Ideco Mud Pumps

T-800 | T-1000 | T-1300 | T-1600

National Mud Pumps

C-150 | C-250 | C-350 | E-500 | E-700 | G-700 | G-1000

 

National Mud Pumps

K-280 | K-380 | K-500 | K-500A | K-700A

 

National Mud Pumps

7P-50 | 8P-80 | 9P-100 | 10P-130 | 12P-160

 

Oilwell Mud Pumps

6P-HD | 610-P | 212-P | 214-P | 218-P

 

Oilwell Mud Pumps

350-PT | 560-PT | A-560-PT | 850-PT | A-850-PT | 1100-PT

 

Oilwell Mud Pumps

A-1100-PT | 1400-PT | A-1400-PT | 1700-PT | A-1700-PT

 

OPI Mud Pumps

350-D | 700-HDL | 1000-HDL

 

Wheatley Mud Pumps

1036 | 6070 | 7024 | 7036

 

Wilson Mud Pumps

600 | 900