NOV JWS-340 Pump Packages, Detroit 60 series, 475 HP, Allison 750 Transmission, 6-speed, 2,500 hrs and 3,100 hrs, NOV 10,000 psi fluid ends, 4″ plungers, mission 4×5 suction pump, NOV plug valve manifold-4 valve, 15K pulsation damper, pop off valves, 8′ w x 23′ l skidded units with canopies, 100 gal diesel tank
Specifications
Pump size
max. dia. X stroke, in.(mm):4 1/2 x 5 (114.3 x 127)
Rated bhp at 450 rpm (kw): 340 (253.5)
Maximum pressure: psi (kPa):10,000(68,950)
Stroke length in. (mm): 5 (127)
Max. speed rpm: 450
Max. plunger in.(mm): 4 (101.6)
Max. piston in.(mm): 4 1/2 (114.3)
Crankshaft extension: in. (mm)
Diameter: 4 7/8 (123.8)
Length: 11 3/4 (298.0)
Keyway (width x depth):1 1/4 x 5/8 (32.0 x 16.0)
Pinion shaft extension,
if gear unit supplied in.(mm)
For belt or chain drive:Diameter: 3 1/2 (88.9)
Length: 5 11/16 (144)
Keyway (width x depth):7/8 x 7/16 (22.2 x 11.1)
For direct drive:Diameter: 3 1/2 (88.9) Length: 5 11/16 (1440
![]()
PREMIUM offer 12-P-160 Mud Pump manufacturered according to API Standards and the quality as good as NATIONAL requirement, which is rated at 1600 input horsepower (1193 kw) at 120 strokes per minute, with a 12-inch (304.8 mm) stroke.
Multiple liner sizes allow pressures and volumes to handle circulation requirements in deep drilling applications.
|
Performance Data |
|||||||
|
Model |
Input Power |
Max. Pressure |
Max. Discharge @ max. pressure |
Length |
Width |
Height |
Weight |
|
|
HP (kW) |
PSI (kg/cm2) |
GPM (LPM) |
ft in (mm) |
ft in (mm) |
ft in (mm) |
lbs (kg) |
|
14-P-220 |
2200 (1640) |
7500 (527) |
375 (1419) |
18' 2" (5544) |
10' 6" (3194) |
7' 1" (2139) |
86000 (39007) |
|
12-P-160 |
1600 (1193) |
7500 (527) |
297 (1124) |
17' 5" (5309) |
9' 6" (2890) |
6' 3" (1905) |
54700 (24810) |
|
10-P-130 |
1300 (969) |
5000 (352) |
357 (1351) |
15' 7" (4740) |
8' 11" (2724) |
5' 7" (1702) |
42550 (19300) |
|
9-P-100 |
1000 (746) |
5000 (352) |
287 (1085) |
14' 8" (4477) |
8' 5" (2572) |
5' 4" (1626) |
33200 (15060) |
|
8-P-80 |
800 (597) |
5000 (352) |
222 (840) |
13' 6" (4105) |
7' 10" (2384) |
5' 0" (1524) |
26970 (12235) |
1.P SERIES PUMPS.
PREMIUM offers a full line of triplex mud pumps to handle any drilling requirement. These tough field-proven models cover input horsepower ratings in the 500 to 2,200 range. The 14-P-220 is the largest member of the P Series of pumps. It is rated for 2,200 input horsepower at 105 strokes per minute and can accommodate liners and pistons up to 9-inch in diameter. It can deliver as much as 1,215 gallons per minute at a pressure of 2,795 psi, or up to 375 GPM at 7,500 psi.* The six, P Series models offer a broad selection of fluid end combinations, drive options and other accessories to tailor pumping requirements to your exact needs.
2.ADDITIONAL POWER AND FLUID END FEATURES OF THE P SERIES PUMPS INCLUDE:
• One-piece construction of crankshaft, connecting rods and pinion shaft. • Roller bearings throughout. • Two-piece piston rod allows removal of piston without disturbing liner. • Clamps lock liners and piston rod assemblies in place. • Full-circle spray cools and lubricates liners regardless of pump speed. • Metal-to-metal liner retention. • Herringbone gears.
3.SELECT THE FLUID END MODULES THAT EXACTLY MATCH YOUR DRILLING REQUIREMENTS.
PREMIUM offers a choice of fluid end modules and valve covers for every P Series pump model. All pump models can be equipped with either the standard or premium forged, two-piece interchangeable fluid modules
4.HIGH PRESSURE MODULES TO 7,500 PSI.
Also available for the 12-P-160 and 14-P-220 mud pumps are high- pressure modules. These are designed for working pressures up to 7,500 psi (527.4 kg/cm2). The 12-P-160 modules have smaller internal bores than the standard or premium modules in order to withstand the higher pressures. The bores for both the 12-P-160 and 14-P-220 high pressure modules, along with premium modules, are autofrettaged to provide improved fatigue life at the higher pres- sures.
5.DURABLE POWER END.
P Series power end features include: • Fabricated steel frame construction. • Accepts a variety of drive arrangements, on either or both sides. • Splash lubrication system (dual type on 14-P-220).
6.EASY-TO-SERVICE-FLUID END.
Fluid end features include: • Two-piece cylinder modules with complete interchangeability between modules. • Variety of valve covers are offered including a FAST CHANGE screw-type arrangement for quicker removal and installation. • Versatility in suction and discharge piping.


